SafeRooting
Cubot Tab 10 root support — Magisk root and bootloader unlock
Cubot

Cubot Tab 10

Released: 2021Available. Released 2021

ROOT AVAILABLE

This device is fully compatible with our remote root service. Includes Bootloader Unlock, Magisk, and custom setup.

4.6 Rating

General

Brand
Cubot
Model
Cubot Tab 10
Released
2021
Status
Available. Released 2021
OS
Android 11
Dimensions
243.5 x 164 x 8.8 mm (9.59 x 6.46 x 0.35 in)
Weight
575 g (1.27 lb)
SIM
Micro-SIM

Display

Type
IPS LCD
Size
10.1 inches, 295.8 cm, 2, (~74.1% screen-to-body ratio)
Resolution
1200 x 1920 pixels, 16:10 ratio (~224 ppi density)

Performance

Chipset
Unisoc SC9863A (28 nm)
CPU
Octa-core (4x1.6 GHz Cortex-A55 & 4x1.2 GHz Cortex-A55)
GPU
IMG8322
Internal
64GB 4GB RAM
Card slot
microSDXC (dedicated slot)

Camera

Single
5 MP
Features
LED flash
Video
Yes

Network

Technology
GSM / HSPA / LTE
2G bands
GSM 850 / 900 / 1800 / 1900
3G bands
HSDPA 900 / 2100
4G bands
1, 3, 7, 8, 20
Speed
HSPA, LTE

Connectivity

WLAN
Wi-Fi 802.11 b/g/n
Bluetooth
4.2, A2DP
Positioning
GPS, GLONASS
NFC
No
Radio
Unspecified
USB
USB Type-C
3.5mm jack
Unspecified

Sensors

Sensors
Accelerometer

Other

Colors
Gray
Announced
2021
Loudspeaker
Yes

Cubot Tab 10 Overview

The Cubot Tab 10 is an Android device from Cubot, released in 2021. It combines the Unisoc SC9863A (28 nm) and a 10.1-inch display, running Android 11. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the Cubot Tab 10

The Cubot Tab 10 is a 2021 Android device from Cubot. It runs the Unisoc SC9863A (28 nm), a Unisoc platform with thinner community tooling — extra caution warranted. Shipped software: Android 11. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 2–4 hours (after eligibility check).

Difficulty

Advanced — verify unlock eligibility first

Typical time

2–4 hours (after eligibility check)

Method

Magisk via patched boot image (fastboot)

Bootloader unlock on Cubot

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

Unisoc platforms have thinner community tooling than Qualcomm or MediaTek; unlock and flash procedures exist for many models but documentation is sparse — verify your exact variant before flashing anything.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.

FAQ

Can I root the Cubot Tab 10?

Only if this exact model and region are eligible for a bootloader unlock. Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing. Once an unlock is approved, root is Magisk via patched boot image (fastboot).

Does the Cubot Tab 10 support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.

Will root the Cubot Tab 10 void my warranty?

Cubot will generally treat a rooted Cubot Tab 10 as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the Cubot Tab 10 run?

It runs Android 11. The specifications table on this page lists the full software details.

Related

Similar Devices