SafeRooting
itel VistaTab 30 root support — Magisk root and bootloader unlock
itel

itel VistaTab 30

Released: 2024, SeptemberAvailable. Released 2024, September

ROOT AVAILABLE

This device is fully compatible with our remote root service. Includes Bootloader Unlock, Magisk, and custom setup.

4.6 Rating

General

Brand
itel
Model
itel VistaTab 30
Released
2024, September
Status
Available. Released 2024, September
OS
Android 13
Dimensions
8.0 mm thickness
Weight
550 g (1.21 lb)
SIM
Nano-SIM

Display

Type
IPS LCD, 450 nits
Size
11.0 inches, 350.9 cm, 2
Resolution
1200 x 1920 pixels, 16:10 ratio (~206 ppi density)

Performance

Chipset
Unisoc T606 (12 nm)
CPU
Octa-core (2x1.6 GHz Cortex-A75 & 6x1.6 GHz Cortex-A55)
GPU
Mali-G57 MP1
Internal
128GB 4GB RAM
Card slot
microSDXC

Camera

Single
5 MP
Features
LED flash
Video
Yes

Battery

Charging
10W wired

Network

Technology
GSM / HSPA / LTE
2G bands
GSM 850 / 900 / 1800 / 1900
3G bands
HSDPA 850 / 900 / 2100
4G bands
LTE
Speed
HSPA, LTE

Connectivity

WLAN
Yes
Bluetooth
Yes
Positioning
Unspecified
NFC
No
Radio
Unspecified
USB
USB Type-C
3.5mm jack
Unspecified

Sensors

Sensors
Accelerometer

Other

Colors
Light Blue, Deep Grey
Announced
2024, September
Loudspeaker
Yes, with dual speakers

itel VistaTab 30 Overview

The itel VistaTab 30 is an Android device from itel, released in 2024. It combines the Unisoc T606 (12 nm) and a 11.0-inch display, running Android 13. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the itel VistaTab 30

The itel VistaTab 30 is a 2024 Android device from itel. It runs the Unisoc T606 (12 nm), a Unisoc platform with thinner community tooling — extra caution warranted. Shipped software: Android 13. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 2–4 hours (after eligibility check).

Difficulty

Advanced — verify unlock eligibility first

Typical time

2–4 hours (after eligibility check)

Method

Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)

Bootloader unlock on itel

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

Unisoc platforms have thinner community tooling than Qualcomm or MediaTek; unlock and flash procedures exist for many models but documentation is sparse — verify your exact variant before flashing anything.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.
  • As a device launched on Android 13, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.

FAQ

Can I root the itel VistaTab 30?

Only if this exact model and region are eligible for a bootloader unlock. Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing. Once an unlock is approved, root is Magisk via patched init_boot image (fastboot).

Does the itel VistaTab 30 support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.

Will root the itel VistaTab 30 void my warranty?

itel will generally treat a rooted itel VistaTab 30 as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the itel VistaTab 30 run?

It runs Android 13. The specifications table on this page lists the full software details.

Related

Similar Devices