SafeRooting
itel VistaTab 30 Pro root support — Magisk root and bootloader unlock
itel

itel VistaTab 30 Pro

Released: 2025, March 05Available. Released 2025, March 05

ROOT AVAILABLE

This device is fully compatible with our remote root service. Includes Bootloader Unlock, Magisk, and custom setup.

4.6 Rating

General

Brand
itel
Model
itel VistaTab 30 Pro
Released
2025, March 05
Status
Available. Released 2025, March 05
Price
About 220 EUR
OS
Android 14
Dimensions
7 mm thickness
Weight
689.3 g (1.52 lb)
SIM
Nano-SIM + Nano-SIM

Display

Type
IPS LCD, 450 nits
Size
13.2 inches, 505.2 cm, 2
Resolution
1200 x 1920 pixels, 16:10 ratio (~172 ppi density)

Performance

Chipset
Mediatek Helio G99 Ultimate (6 nm)
CPU
Octa-core (2x2.2 GHz Cortex-A76 & 6x2.0 GHz Cortex-A55)
GPU
Mali-G57 MC2
Internal
256GB 8GB RAM
Card slot
microSDXC

Camera

Single
8 MP
Features
LED flash
Video
Yes

Battery

Charging
18W wired

Network

Technology
GSM / HSPA / LTE
2G bands
GSM 850 / 900 / 1800 / 1900
3G bands
HSDPA 850 / 900 / 2100
4G bands
LTE
Speed
HSPA, LTE

Connectivity

WLAN
Wi-Fi 802.11 a/b/g/n/ac, dual-band
Bluetooth
5.2, A2DP, LE
Positioning
Unspecified
NFC
No
Radio
Unspecified
USB
USB Type-C, magnetic accessory connector pins
3.5mm jack
No

Sensors

Sensors
Accelerometer

Other

Colors
Gray
Announced
2025, March 05
Loudspeaker
Yes, with dual speakers

itel VistaTab 30 Pro Overview

The itel VistaTab 30 Pro is an Android device from itel, released in 2025. It combines the Mediatek Helio G99 Ultimate (6 nm) and a 13.2-inch display, running Android 14. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the itel VistaTab 30 Pro

The itel VistaTab 30 Pro is a 2025 Android device from itel. It runs the Mediatek Helio G99 Ultimate (6 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 14. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 1–3 hours.

Difficulty

Moderate — brand-specific steps involved

Typical time

1–3 hours

Method

Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)

Bootloader unlock on itel

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.
  • As a device launched on Android 14, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.

FAQ

Can I root the itel VistaTab 30 Pro?

Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched init_boot image (fastboot). The unlock notes on this page describe the exact itel procedure.

Does the itel VistaTab 30 Pro support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.

Will root the itel VistaTab 30 Pro void my warranty?

itel will generally treat a rooted itel VistaTab 30 Pro as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the itel VistaTab 30 Pro run?

It runs Android 14. The specifications table on this page lists the full software details.

Related

Similar Devices