General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
Meizu 20 Pro Overview
The Meizu 20 Pro is an Android device from Meizu, released in 2023. It combines the Qualcomm SM8550-AB Snapdragon 8 Gen 2 (4 nm) and a 6.81-inch display, running Android 13. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the Meizu 20 Pro
The Meizu 20 Pro is a 2023 Android device from Meizu. It runs the Qualcomm SM8550-AB Snapdragon 8 Gen 2 (4 nm), a Qualcomm platform with strong community tooling and EDL-mode recovery as a safety net. Shipped software: Android 13, Flyme 10. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)
Bootloader unlock on Meizu
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
Qualcomm Snapdragon platforms are the best-supported in the root community: fastboot works as documented, and even a failed flash can usually be recovered through EDL (9008) emergency mode.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
- As a device launched on Android 13, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.
FAQ
Can I root the Meizu 20 Pro?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched init_boot image (fastboot). The unlock notes on this page describe the exact Meizu procedure.
Does the Meizu 20 Pro support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.
Will root the Meizu 20 Pro void my warranty?
Meizu will generally treat a rooted Meizu 20 Pro as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the Meizu 20 Pro run?
It runs Android 13, Flyme 10. The specifications table on this page lists the full software details.
Similar Devices
Meizu 22
Meizu Note 22 Pro
Meizu Note 22
Meizu mblu 22
Meizu mblu 22 Pro
Meizu 21 Pro
Meizu 21 Note
Meizu Blue 20