General
Display
Performance
Camera
Network
Connectivity
Sensors
Other
Meizu V8 Overview
The Meizu V8 is an Android device from Meizu, released in 2018. It combines the Mediatek MT6739 (28 nm) and a 5.7-inch display, running Android 8.0 (Oreo). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the Meizu V8
The Meizu V8 is a 2018 Android device from Meizu. It runs the Mediatek MT6739 (28 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 8.0 (Oreo), Flyme UI. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched boot image (fastboot)
Bootloader unlock on Meizu
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
FAQ
Can I root the Meizu V8?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Meizu procedure.
Does the Meizu V8 support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.
Will root the Meizu V8 void my warranty?
Meizu will generally treat a rooted Meizu V8 as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the Meizu V8 run?
It runs Android 8.0 (Oreo), Flyme UI. The specifications table on this page lists the full software details.
Similar Devices
Meizu 22
Meizu Note 22 Pro
Meizu Note 22
Meizu mblu 22
Meizu mblu 22 Pro
Meizu 21 Pro
Meizu 21 Note
Meizu Blue 20