General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
Sharp Aquos S3 High Overview
The Sharp Aquos S3 High is an Android device from Sharp, released in 2018. It combines the Qualcomm SDM660 Snapdragon 660 (14 nm) and a 6.0-inch display, running Android 8.0 (Oreo). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the Sharp Aquos S3 High
The Sharp Aquos S3 High is a 2018 Android device from Sharp. It runs the Qualcomm SDM660 Snapdragon 660 (14 nm), a Qualcomm platform with strong community tooling and EDL-mode recovery as a safety net. Shipped software: Android 8.0 (Oreo). For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched boot image (fastboot)
Bootloader unlock on Sharp
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
Qualcomm Snapdragon platforms are the best-supported in the root community: fastboot works as documented, and even a failed flash can usually be recovered through EDL (9008) emergency mode.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
FAQ
Can I root the Sharp Aquos S3 High?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Sharp procedure.
Does the Sharp Aquos S3 High support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.
Will root the Sharp Aquos S3 High void my warranty?
Sharp will generally treat a rooted Sharp Aquos S3 High as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the Sharp Aquos S3 High run?
It runs Android 8.0 (Oreo). The specifications table on this page lists the full software details.
Similar Devices
Sharp Aquos sense10
Sharp Aquos R10
Sharp Aquos wish5
Sharp Aquos sense8
Sharp Aquos wish4
Sharp Aquos R9
Sharp Aquos R9 pro
Sharp Aquos sense9