General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
TCL NxtPaper 70 Pro Overview
The TCL NxtPaper 70 Pro is an Android device from Tcl, released in 2026. It combines the Mediatek Dimensity 7300 (4 nm) and a 6.9-inch display, running Android 16. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the TCL NxtPaper 70 Pro
The TCL NxtPaper 70 Pro is a 2026 Android device from Tcl. It runs the Mediatek Dimensity 7300 (4 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 16. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)
Bootloader unlock on Tcl
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
- As a device launched on Android 16, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.
FAQ
Can I root the TCL NxtPaper 70 Pro?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched init_boot image (fastboot). The unlock notes on this page describe the exact Tcl procedure.
Does the TCL NxtPaper 70 Pro support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.
Will root the TCL NxtPaper 70 Pro void my warranty?
Tcl will generally treat a rooted TCL NxtPaper 70 Pro as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the TCL NxtPaper 70 Pro run?
It runs Android 16. The specifications table on this page lists the full software details.
Similar Devices
TCL K70
TCL K70 Power
TCL NxtPaper 11 Gen 2
TCL Tab 10L Gen 4
TCL NxtPaper 60 Ultra
TCL 605
TCL 60 SE
TCL 60R