General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
Tecno Spark 40 Pro+ Overview
The Tecno Spark 40 Pro+ is an Android device from TECNO, released in 2025. It combines the Mediatek Helio G200 (6 nm) and a 6.78-inch display, running Android 15. This page tracks its full specifications, rooting status, and the bootloader and recovery notes that apply to it.
Rooting the Tecno Spark 40 Pro+
The Tecno Spark 40 Pro+ is a 2025 Android device from TECNO. It runs the Mediatek Helio G200 (6 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 15, HIOS 15. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)
Bootloader unlock on TECNO
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
- As a device launched on Android 15, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.
FAQ
Can I root the Tecno Spark 40 Pro+?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched init_boot image (fastboot). The unlock notes on this page describe the exact TECNO procedure.
Does the Tecno Spark 40 Pro+ support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.
Will rooting the Tecno Spark 40 Pro+ void my warranty?
TECNO will generally treat a rooted Tecno Spark 40 Pro+ as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to rooting.
What Android version does the Tecno Spark 40 Pro+ run?
It runs Android 15, HIOS 15. The specifications table on this page lists the full software details.
Similar Devices
Tecno Megapad SE
Tecno Spark Go 3
Tecno Pova Curve 2
Tecno Camon 50 4G
Tecno Camon 50 Pro 4G
Tecno Megapad Pro
Tecno Spark Slim
Tecno Pova Slim