SafeRooting
Tecno Spark 5 Air root support — Magisk root and bootloader unlock
TECNO

Tecno Spark 5 Air

Released: 2020, May 05Available. Released 2020, July

ROOT AVAILABLE

This device is fully compatible with our remote root service. Includes Bootloader Unlock, Magisk, and custom setup.

4.6 Rating

General

Brand
Tecno
Model
Tecno Spark 5 Air
Released
2020, May 05
Status
Available. Released 2020, July
OS
Android 10 (Go edition), HIOS 6.0
Dimensions
174.6 x 79.3 x 9.1 mm (6.87 x 3.12 x 0.36 in)
Weight
-
SIM
Nano-SIM + Nano-SIM

Display

Type
IPS LCD
Size
7.0 inches, 116.4 cm, 2, (~84.0% screen-to-body ratio)
Resolution
720 x 1640 pixels (~256 ppi density)

Performance

Chipset
Mediatek
CPU
Quad-core
Internal
32GB 2GB RAM
Card slot
microSDXC (dedicated slot)

Camera

Single
8 MP, f/2.0, (wide)
Dual
13 MP, f/1.8, PDAF, QVGA
Features
Dual-LED flash, HDR
Video
1080p@30fps

Network

Technology
GSM / HSPA / LTE
2G bands
GSM 850 / 900 / 1800 / 1900
3G bands
HSDPA 850 / 900 / 2100
4G bands
LTE
Speed
HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps

Connectivity

WLAN
Wi-Fi 802.11 b/g/n
Bluetooth
Yes
Positioning
GPS
NFC
No
Radio
FM radio
USB
microUSB 2.0, OTG
3.5mm jack
Yes

Sensors

Sensors
Fingerprint (rear-mounted), accelerometer, proximity

Other

Colors
Ice Jadeite, Spark Orange, Vacation Blue, Misty Green
Models
KD6a
Announced
2020, May 05
Loudspeaker
Yes

Tecno Spark 5 Air Overview

The Tecno Spark 5 Air is an Android device from TECNO, released in 2020. It combines the Mediatek and a 7.0-inch display, running Android 10 (Go edition). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the Tecno Spark 5 Air

The Tecno Spark 5 Air is a 2020 Android device from TECNO. It runs the Mediatek, a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 10 (Go edition), HIOS 6.0. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.

Difficulty

Moderate — brand-specific steps involved

Typical time

1–3 hours

Method

Magisk via patched boot image (fastboot)

Bootloader unlock on TECNO

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.

FAQ

Can I root the Tecno Spark 5 Air?

Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact TECNO procedure.

Does the Tecno Spark 5 Air support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.

Will root the Tecno Spark 5 Air void my warranty?

TECNO will generally treat a rooted Tecno Spark 5 Air as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the Tecno Spark 5 Air run?

It runs Android 10 (Go edition), HIOS 6.0. The specifications table on this page lists the full software details.

Related

Similar Devices