General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
Umidigi G3 Tab Overview
The Umidigi G3 Tab is an Android device from Umidigi, released in 2021. It combines the Mediatek Helio A22 (12 nm) and a 10.1-inch display, running Android 13. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the Umidigi G3 Tab
The Umidigi G3 Tab is a 2021 Android device from Umidigi. It runs the Mediatek Helio A22 (12 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 13. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)
Bootloader unlock on Umidigi
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
- As a device launched on Android 13, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.
FAQ
Can I root the Umidigi G3 Tab?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched init_boot image (fastboot). The unlock notes on this page describe the exact Umidigi procedure.
Does the Umidigi G3 Tab support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.
Will root the Umidigi G3 Tab void my warranty?
Umidigi will generally treat a rooted Umidigi G3 Tab as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the Umidigi G3 Tab run?
It runs Android 13. The specifications table on this page lists the full software details.
Similar Devices
Umidigi Note 100
Umidigi Note 100 4G
Umidigi G9x
Umidigi Note 100A
Umidigi Note 100 5G
Umidigi G3 Tab Ultra
Umidigi G1 Tab Mini
Umidigi Bison X20