SafeRooting
Wiko View2 Pro root support — Magisk root and bootloader unlock
Wiko

Wiko View2 Pro

Released: 2018, FebruaryAvailable. Released 2018, May

COMING SOON

We are currently verifying the root process for this specific model. Stay tuned for expert support.

4.6 Rating

General

Brand
Wiko
Model
Wiko View2 Pro
Released
2018, February
Status
Available. Released 2018, May
Price
About 300 EUR
OS
Android 8.0 (Oreo)
Dimensions
153 x 72.6 x 8.3 mm (6.02 x 2.86 x 0.33 in)
Weight
164 g (5.78 oz)
Build
Glass front (Gorilla Glass), aluminum back, aluminum frame
SIM
Nano-SIM + Nano-SIM

Display

Type
IPS LCD
Size
6.0 inches, 89.6 cm, 2, (~80.6% screen-to-body ratio)
Resolution
720 x 1528 pixels (~282 ppi density)
Protection
Corning Gorilla Glass

Performance

Chipset
Qualcomm SDM450 Snapdragon 450 (14 nm)
CPU
Octa-core 1.8 GHz Cortex-A53
GPU
Adreno 506
Internal
64GB 4GB RAM
Card slot
microSDXC (uses shared SIM slot)

Camera

Single
16 MP, f/2.0, 26mm (wide), 1/3.06", 1.0µm
Dual
16 MP, f/1.8, dual pixel PDAF, 16 MP, f/1.8, dual pixel PDAF
Features
Dual-LED dual-tone flash, panorama
Video
1080p@30fps

Network

Technology
GSM / HSPA / LTE
2G bands
GSM 850 / 900 / 1800 / 1900
3G bands
HSDPA 850 / 900 / 1900 / 2100
4G bands
1, 3, 7, 8, 20
Speed
HSPA 21.1/5.76 Mbps, LTE (2CA) Cat6 300/50 Mbps

Connectivity

WLAN
Wi-Fi 802.11 b/g/n, Wi-Fi Direct
Bluetooth
4.2, A2DP, LE
Positioning
GPS
NFC
Yes
Radio
Stereo FM radio
USB
microUSB 2.0, OTG
3.5mm jack
Yes

Sensors

Sensors
Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass

Other

Colors
Black, Gold
Models
W_C860
Announced
2018, February
Loudspeaker
Yes

Wiko View2 Pro Overview

The Wiko View2 Pro is an Android device from Wiko, released in 2018. It combines the Qualcomm SDM450 Snapdragon 450 (14 nm) and a 6.0-inch display, running Android 8.0 (Oreo). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the Wiko View2 Pro

The Wiko View2 Pro is a 2018 Android device from Wiko. It runs the Qualcomm SDM450 Snapdragon 450 (14 nm), a Qualcomm platform with strong community tooling and EDL-mode recovery as a safety net. Shipped software: Android 8.0 (Oreo). For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.

Difficulty

Moderate — brand-specific steps involved

Typical time

1–3 hours

Method

Magisk via patched boot image (fastboot)

Bootloader unlock on Wiko

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

Qualcomm Snapdragon platforms are the best-supported in the root community: fastboot works as documented, and even a failed flash can usually be recovered through EDL (9008) emergency mode.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.

FAQ

Can I root the Wiko View2 Pro?

Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Wiko procedure.

Does the Wiko View2 Pro support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.

Will root the Wiko View2 Pro void my warranty?

Wiko will generally treat a rooted Wiko View2 Pro as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the Wiko View2 Pro run?

It runs Android 8.0 (Oreo). The specifications table on this page lists the full software details.

Related

Similar Devices