General
Display
Performance
Camera
Network
Connectivity
Sensors
Other
Yezz GO 1 Overview
The Yezz GO 1 is an Android device from Yezz, released in 2020. It combines the Mediatek MT6580 (28 nm) and a 4.0-inch display, running Android 10 (Go edition). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the Yezz GO 1
The Yezz GO 1 is a 2020 Android device from Yezz. It runs the Mediatek MT6580 (28 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 10 (Go edition). For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched boot image (fastboot)
Bootloader unlock on Yezz
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
FAQ
Can I root the Yezz GO 1?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Yezz procedure.
Does the Yezz GO 1 support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.
Will root the Yezz GO 1 void my warranty?
Yezz will generally treat a rooted Yezz GO 1 as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the Yezz GO 1 run?
It runs Android 10 (Go edition). The specifications table on this page lists the full software details.
Similar Devices
Yezz Max 2 Ultra
Yezz EPIC 3
Yezz Art 3 Lite
Yezz C32
Yezz Art 3 Pro
Yezz Liv 3S LTE
Yezz Max 3
Yezz Max 3 Plus