SafeRooting
Yezz Liv 2 LTE root support — Magisk root and bootloader unlock
Yezz

Yezz Liv 2 LTE

Released: 2020, MarchAvailable. Released 2020, August

ROOT AVAILABLE

This device is fully compatible with our remote root service. Includes Bootloader Unlock, Magisk, and custom setup.

4.6 Rating

General

Brand
Yezz
Model
Yezz Liv 2 LTE
Released
2020, March
Status
Available. Released 2020, August
OS
Android 10 (Go edition)
Dimensions
149 x 72.5 x 9.7 mm (5.87 x 2.85 x 0.38 in)
Weight
112 g (3.95 oz)
SIM
Dual SIM (Micro-SIM, dual stand-by)

Display

Type
TFT LCD
Size
5.0 inches, 68.9 cm, 2, (~63.8% screen-to-body ratio)
Resolution
540 x 960 pixels, 16:9 ratio (~220 ppi density)
Protection
Corning Gorilla Glass 3 or Asahi Dragontrail Glass

Performance

Chipset
Mediatek MT6739 (28 nm)
CPU
Quad-core 1.5 GHz Cortex-A53
Internal
16GB 1GB RAM
Card slot
microSDXC (dedicated slot)

Camera

Dual
12 MP, f/1.8, 25mm (wide), 1/2.55", 1.4µm, 8 MP, 12mm, (ultrawide)
Features
LED flash
Video
1080p@30fps

Network

Technology
GSM / HSPA / LTE
2G bands
GSM 850 / 900 / 1800 / 1900
3G bands
HSDPA 850 / 900 / 1900 / 2100
4G bands
2, 3, 4, 7, 12, 17, 28
Speed
HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps

Connectivity

WLAN
Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct
Bluetooth
4.0, A2DP, LE
Positioning
GPS, GLONASS
NFC
No
Radio
FM radio, recording
USB
microUSB 2.0
3.5mm jack
Yes

Sensors

Sensors
Accelerometer, proximity

Other

Colors
Black, Green, Red, Gray
Announced
2020, March
Loudspeaker
Yes

Yezz Liv 2 LTE Overview

The Yezz Liv 2 LTE is an Android device from Yezz, released in 2020. It combines the Mediatek MT6739 (28 nm) and a 5.0-inch display, running Android 10 (Go edition). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the Yezz Liv 2 LTE

The Yezz Liv 2 LTE is a 2020 Android device from Yezz. It runs the Mediatek MT6739 (28 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 10 (Go edition). For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.

Difficulty

Moderate — brand-specific steps involved

Typical time

1–3 hours

Method

Magisk via patched boot image (fastboot)

Bootloader unlock on Yezz

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.

FAQ

Can I root the Yezz Liv 2 LTE?

Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Yezz procedure.

Does the Yezz Liv 2 LTE support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.

Will root the Yezz Liv 2 LTE void my warranty?

Yezz will generally treat a rooted Yezz Liv 2 LTE as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the Yezz Liv 2 LTE run?

It runs Android 10 (Go edition). The specifications table on this page lists the full software details.

Related

Similar Devices