SafeRooting
ZTE Blade V10 root support — Magisk root and bootloader unlock
Zte

ZTE Blade V10

Released: 2019, FebruaryAvailable. Released 2019, March

ROOT AVAILABLE

This device is fully compatible with our remote root service. Includes Bootloader Unlock, Magisk, and custom setup.

4.6 Rating

General

Brand
ZTE
Model
ZTE Blade V10
Released
2019, February
Status
Available. Released 2019, March
OS
Android 9.0 (Pie), MiFavor 9.0
Dimensions
157.8 x 75.2 x 7.8 mm (6.21 x 2.96 x 0.31 in)
Weight
156 g (5.50 oz)
SIM
Nano-SIM + Nano-SIM

Display

Type
IPS LCD
Size
6.3 inches, 99.1 cm, 2, (~83.5% screen-to-body ratio)
Resolution
1080 x 2280 pixels, 19:9 ratio (~400 ppi density)

Performance

Chipset
Mediatek MT6771V Helio P70 (12 nm)
CPU
Octa-core (4x2.1 GHz Cortex-A73 & 4x2.0 GHz Cortex-A53)
GPU
Mali-G72 MP3
Internal
32GB 3GB RAM, 64GB 4GB RAM
Card slot
microSDXC (uses shared SIM slot)

Camera

Single
32 MP, f/2.0, 26mm (wide), 1/2.8", 0.8µm
Dual
16 MP, f/1.8, 1.12µm, PDAF, 5 MP, f/2.2, (depth)
Features
LED flash
Video
1080p@30fps

Network

Technology
GSM / HSPA / LTE
2G bands
GSM 850 / 900 / 1800 / 1900
3G bands
HSDPA 850 / 900 / 1900 / 2100
4G bands
1, 3, 5, 7, 8, 20, 38
Speed
HSPA 42.2/5.76 Mbps, LTE (2CA) Cat7 300/50 Mbps

Connectivity

WLAN
Wi-Fi 802.11 b/g/n/ac, dual-band, Wi-Fi Direct
Bluetooth
4.2, A2DP, LE
Positioning
GPS, GLONASS
NFC
Yes (market dependent)
Radio
FM radio
USB
USB Type-C 2.0, OTG
3.5mm jack
Yes

Sensors

Sensors
Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass

Other

Colors
Black, Blue, Green
Announced
2019, February
Loudspeaker
Yes

ZTE Blade V10 Overview

The ZTE Blade V10 is an Android device from Zte, released in 2019. It combines the Mediatek MT6771V Helio P70 (12 nm) and a 6.3-inch display, running Android 9.0 (Pie). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the ZTE Blade V10

The ZTE Blade V10 is a 2019 Android device from Zte. It runs the Mediatek MT6771V Helio P70 (12 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 9.0 (Pie), MiFavor 9.0. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.

Difficulty

Moderate — brand-specific steps involved

Typical time

1–3 hours

Method

Magisk via patched boot image (fastboot)

Bootloader unlock on Zte

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.

FAQ

Can I root the ZTE Blade V10?

Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Zte procedure.

Does the ZTE Blade V10 support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.

Will root the ZTE Blade V10 void my warranty?

Zte will generally treat a rooted ZTE Blade V10 as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the ZTE Blade V10 run?

It runs Android 9.0 (Pie), MiFavor 9.0. The specifications table on this page lists the full software details.

Related

Similar Devices