General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
ZTE nubia Pad 3D II Overview
The ZTE nubia Pad 3D II is an Android device from Zte, released in 2024. It combines the Qualcomm SM8550-AB Snapdragon 8 Gen 2 (4 nm) and a 12.1-inch display, running Android 14. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the ZTE nubia Pad 3D II
The ZTE nubia Pad 3D II is a 2024 Android device from Zte. It runs the Qualcomm SM8550-AB Snapdragon 8 Gen 2 (4 nm), a Qualcomm platform with strong community tooling and EDL-mode recovery as a safety net. Shipped software: Android 14. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)
Bootloader unlock on Zte
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
Qualcomm Snapdragon platforms are the best-supported in the root community: fastboot works as documented, and even a failed flash can usually be recovered through EDL (9008) emergency mode.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
- As a device launched on Android 14, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.
FAQ
Can I root the ZTE nubia Pad 3D II?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched init_boot image (fastboot). The unlock notes on this page describe the exact Zte procedure.
Does the ZTE nubia Pad 3D II support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.
Will root the ZTE nubia Pad 3D II void my warranty?
Zte will generally treat a rooted ZTE nubia Pad 3D II as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the ZTE nubia Pad 3D II run?
It runs Android 14. The specifications table on this page lists the full software details.