General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
Kyocera DuraForce Pro 2 Overview
The Kyocera DuraForce Pro 2 is an Android device from Kyocera, released in 2018. It combines the Qualcomm SDM630 Snapdragon 630 (14 nm) and a 5.0-inch display, running Android 8.0 (Oreo). This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the Kyocera DuraForce Pro 2
The Kyocera DuraForce Pro 2 is a 2018 Android device from Kyocera. It runs the Qualcomm SDM630 Snapdragon 630 (14 nm), a Qualcomm platform with strong community tooling and EDL-mode recovery as a safety net. Shipped software: Android 8.0 (Oreo). For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.
Difficulty
Moderate — brand-specific steps involved
Typical time
1–3 hours
Method
Magisk via patched boot image (fastboot)
Bootloader unlock on Kyocera
Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.
Platform notes
Qualcomm Snapdragon platforms are the best-supported in the root community: fastboot works as documented, and even a failed flash can usually be recovered through EDL (9008) emergency mode.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
FAQ
Can I root the Kyocera DuraForce Pro 2?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Kyocera procedure.
Does the Kyocera DuraForce Pro 2 support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.
Will root the Kyocera DuraForce Pro 2 void my warranty?
Kyocera will generally treat a rooted Kyocera DuraForce Pro 2 as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the Kyocera DuraForce Pro 2 run?
It runs Android 8.0 (Oreo). The specifications table on this page lists the full software details.
Similar Devices
Kyocera DuraSlate
Kyocera DuraSport UW
Kyocera DuraForce Pro 3
Kyocera DuraForce Ultra
Kyocera DuraForce Pro
Kyocera DuraForce XD