SafeRooting
Kyocera DuraSlate root support — Magisk root and bootloader unlock
Kyocera

Kyocera DuraSlate

Released: 2023, OctoberAvailable. Released 2023, October

ROOT AVAILABLE

This device is fully compatible with our remote root service. Includes Bootloader Unlock, Magisk, and custom setup.

4.6 Rating

General

Brand
Kyocera
Model
Kyocera DuraSlate
Released
2023, October
Status
Available. Released 2023, October
Price
About 360 EUR
OS
Android 12
Dimensions
259 x 168 x 8.6 mm (10.20 x 6.61 x 0.34 in)
Weight
488 g (1.08 lb)
SIM
No

Display

Type
IPS LCD
Size
10.1 inches, 295.8 cm, 2, (~68.0% screen-to-body ratio)
Resolution
1200 x 1920 pixels, 16:10 ratio (~224 ppi density)
Protection
Dragontrail Pro Glass

Performance

Chipset
Mediatek MT6765 Helio P35 (12 nm)
CPU
Octa-core (4x2.35 GHz Cortex-A53 & 4x1.8 GHz Cortex-A53)
GPU
PowerVR GE8320
Internal
32GB 3GB RAM
Card slot
microSDXC (dedicated slot)

Camera

Single
5 MP, f/2.4
Features
LED flash
Video
Yes

Battery

Charging
45W wired, PD2

Network

Technology
No cellular connectivity
2G bands
N/A
3G bands
N/A
4G bands
N/A

Connectivity

WLAN
Wi-Fi 802.11 a/b/g/n/ac/d/e/i/k/r/v, dual-band, Wi-Fi Direct
Bluetooth
5.1, A2DP, LE
Positioning
GPS, GALILEO, GLONASS, BDS, QZSS
NFC
No
Radio
Unspecified
USB
USB Type-C 2.0
3.5mm jack
Yes

Sensors

Sensors
Accelerometer, gyro, proximity, compass

Other

EDGE
No
GPRS
No
Colors
Black
Models
KC-T304C
Announced
2023, October
Loudspeaker
Yes, with stereo speakers

Kyocera DuraSlate Overview

The Kyocera DuraSlate is an Android device from Kyocera, released in 2023. It combines the Mediatek MT6765 Helio P35 (12 nm) and a 10.1-inch display, running Android 12. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the Kyocera DuraSlate

The Kyocera DuraSlate is a 2023 Android device from Kyocera. It runs the Mediatek MT6765 Helio P35 (12 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 12. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched boot image (fastboot). Typical hands-on time is 1–3 hours.

Difficulty

Moderate — brand-specific steps involved

Typical time

1–3 hours

Method

Magisk via patched boot image (fastboot) — KernelSU also viable (GKI kernel)

Bootloader unlock on Kyocera

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.

FAQ

Can I root the Kyocera DuraSlate?

Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched boot image (fastboot). The unlock notes on this page describe the exact Kyocera procedure.

Does the Kyocera DuraSlate support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched boot image via fastboot.

Will root the Kyocera DuraSlate void my warranty?

Kyocera will generally treat a rooted Kyocera DuraSlate as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the Kyocera DuraSlate run?

It runs Android 12. The specifications table on this page lists the full software details.

Related

Similar Devices