General
Display
Performance
Camera
Battery
Network
Connectivity
Sensors
Other
Nothing Phone (3a) Pro Overview
The Nothing Phone (3a) Pro is a 2025 Android device from Nothing. It combines the Qualcomm SM7635 Snapdragon 7s Gen 3 (4 nm) and a 6.77-inch display, running Android 15. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.
Root the Nothing Phone (3a) Pro
The Nothing Phone (3a) Pro is a 2025 Android device from Nothing. It runs the Qualcomm SM7635 Snapdragon 7s Gen 3 (4 nm), a Qualcomm platform with strong community tooling and EDL-mode recovery as a safety net. Shipped software: Android 15, up to 3 major Android upgrades, Nothing OS 3.1. For this model the realistic path is: the brand-specific unlock described below, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 30–60 minutes.
Difficulty
Easy — well-supported device
Typical time
30–60 minutes
Method
Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)
Bootloader unlock on Nothing
Nothing ships unlockable bootloaders with a standard fastboot flow and maintains a public stance friendly to modding — one of the simpler brands to root.
Platform notes
Qualcomm Snapdragon platforms are the best-supported in the root community: fastboot works as documented, and even a failed flash can usually be recovered through EDL (9008) emergency mode.
Before you start
- Bootloader unlocking factory-resets the device on almost all models — back up everything first.
- As a device launched on Android 15, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.
FAQ
Can I root the Nothing Phone (3a) Pro?
Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched init_boot image (fastboot). The unlock notes on this page describe the exact Nothing procedure.
Does the Nothing Phone (3a) Pro support custom recovery (TWRP)?
That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.
Will root the Nothing Phone (3a) Pro void my warranty?
Nothing will generally treat a rooted Nothing Phone (3a) Pro as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.
What Android version does the Nothing Phone (3a) Pro run?
It runs Android 15, up to 3 major Android upgrades, Nothing OS 3.1. The specifications table on this page lists the full software details.
Similar Devices
Nothing Phone (4a)
Nothing Phone (4a) Pro
Nothing CMF Watch 3 Pro
Nothing Phone (3a) Lite
Nothing Phone (3)
Nothing CMF Phone 2 Pro
Nothing Phone (3a)
Nothing CMF Watch Pro 2