SafeRooting
TCL NxtPaper 14 root support — Magisk root and bootloader unlock
Tcl

TCL NxtPaper 14

Released: 2024, FebruaryAvailable. Released 2024, July

ROOT AVAILABLE

This device is fully compatible with our remote root service. Includes Bootloader Unlock, Magisk, and custom setup.

4.6 Rating

General

Brand
TCL
Model
TCL NxtPaper 14
Released
2024, February
Status
Available. Released 2024, July
Price
About 450 EUR
OS
Android 14
Dimensions
322.4 x 222 x 7 mm (12.69 x 8.74 x 0.28 in)
Weight
760 g (1.68 lb)
SIM
No

Display

Type
IPS, 400 nits
Size
14.3 inches, 608.9 cm, 2, (~85.1% screen-to-body ratio)
Resolution
1600 x 2400 pixels, 3:2 ratio (~202 ppi density)

Performance

Chipset
Mediatek Helio G99 (6 nm)
CPU
Octa-core (2x2.2 GHz Cortex-A76 & 6x2.0 GHz Cortex-A55)
GPU
Mali-G57 MC2
Internal
256GB 8GB RAM
Card slot
microSDXC (dedicated slot)

Camera

Single
8 MP, AF
Dual
13 MP, 5 MP
Features
LED flash
Video
1080p@30fps

Battery

Charging
33W wired

Network

Technology
No cellular connectivity
2G bands
N/A
3G bands
N/A
4G bands
N/A

Connectivity

WLAN
Wi-Fi 802.11 a/b/g/n/ac, dual-band
Bluetooth
5.0, A2DP, LE
Positioning
GPS
NFC
No
Radio
No
USB
USB Type-C 2.0, OTG
3.5mm jack
No

Sensors

Sensors
Accelerometer, proximity, compass

Other

EDGE
No
GPRS
No
Colors
Navy Blue
Announced
2024, February
Loudspeaker
Yes, with stereo speakers (4 speakers)

TCL NxtPaper 14 Overview

The TCL NxtPaper 14 is an Android device from Tcl, released in 2024. It combines the Mediatek Helio G99 (6 nm) and a 14.3-inch display, running Android 14. This page tracks its full specifications, root status, and the bootloader and recovery notes that apply to it.

Root the TCL NxtPaper 14

The TCL NxtPaper 14 is a 2024 Android device from Tcl. It runs the Mediatek Helio G99 (6 nm), a MediaTek platform, flashed via SP Flash Tool on many models with BROM as the deep-recovery path. Shipped software: Android 14. For this model the realistic path is: a standard fastboot bootloader unlock, followed by Magisk via patched init_boot image (fastboot). Typical hands-on time is 1–3 hours.

Difficulty

Moderate — brand-specific steps involved

Typical time

1–3 hours

Method

Magisk via patched init_boot image (fastboot) — KernelSU also viable (GKI kernel)

Bootloader unlock on Tcl

Unlock procedure follows the generic Android flow: enable OEM Unlocking in Developer Options, then unlock via fastboot. Exact availability depends on the model and region — confirm before flashing.

Platform notes

MediaTek platforms flash through SP Flash Tool rather than plain fastboot on many models, and expose BROM mode as a deep-recovery path. Correct scatter/firmware matching matters more here than on Snapdragon devices.

Before you start

  • Bootloader unlocking factory-resets the device on almost all models — back up everything first.
  • As a device launched on Android 14, the Magisk target is typically init_boot.img, not boot.img — patching the wrong image is the top bootloop cause on newer models.

FAQ

Can I root the TCL NxtPaper 14?

Yes. After enabling OEM Unlocking and unlocking the bootloader, root is Magisk via patched init_boot image (fastboot). The unlock notes on this page describe the exact Tcl procedure.

Does the TCL NxtPaper 14 support custom recovery (TWRP)?

That depends on community support for this exact model — verify a build exists for its codename before flashing anything. TWRP is not required for root: Magisk installs by flashing a patched init_boot image via fastboot.

Will root the TCL NxtPaper 14 void my warranty?

Tcl will generally treat a rooted TCL NxtPaper 14 as outside warranty while it is modified. Restoring full stock firmware before a service visit usually restores normal treatment in practice, and consumer law in some regions (such as the EU) may still cover defects unrelated to root.

What Android version does the TCL NxtPaper 14 run?

It runs Android 14. The specifications table on this page lists the full software details.

Related

Similar Devices